The Otter Creek Labs Midway Adapter sits between the OTB and PTB mounts for OPS 12, AEM5, OCM5 and OCM6 suppressors. It does not reflex all the way over the barrel like the OTB Adapter, but it does not add the full length of the PTB Adapter either. Use it when you do not have enough exposed barrel for the OTB but do not want to give up the length the PTB adds: it needs only 1.45 inches of exposed barrel measured from the shoulder, on a 1/2x28 barrel of .75 inch or less in diameter. Raw heat-treated 17-4 stainless.
Will it fit?
| Works with | Otter Creek Labs OCM6 and OCM5, OPS Inc 12th Model and Allen Engineering AEM5 |
|---|---|
| Your barrel thread | 1/2x28, barrel diameter .75" or less, at least 1.45" exposed from the shoulder |
| You also need | Nothing else; a OPS/AE/OC Thread Protector is handy when the can is off |
| Does NOT work with | HUB suppressors; 5/8x24 barrels; barrels thicker than .75" (use the PTB Adapter) |
Specifications
| Manufacturer | Otter Creek Labs |
|---|---|
| Part number | OCL-501 |
| Type | One-piece Midway (MWA) adapter |
| Barrel thread | 1/2x28 |
| Barrel requirements | OD .75" or less, 1.45" or more exposed from the shoulder |
| Material | Heat-treated 17-4 stainless steel |
| Finish | Raw heat treat |
| UPC | 664533659113 |
This is a mount part, not a suppressor, so it ships like any other accessory with no NFA paperwork. We are happy to ship out of state.
Not sure it fits your can or barrel? Call (602) 715-2677 with your suppressor model and barrel thread and we will confirm before you buy.
| Manufacturer | Otter Creek Labs |
| Model | Midway Adapter |
| Type | Parts |
| Finish | Raw Heat Treat |
| Material | Stainless Steel |
| Mount Type | 1/2x28 |